# Installing TargetAgent on Armbian / Debian (Buster) H3 build **URL:** \ **Category:** Troubleshooting\ **Created:** [September 22, 2021, 11:17am UTC](https://forum.remote.it/t/installing-targetagent-on-armbian-debian-buster-h3-build/437 "2021-09-22T11:17:32Z")\ **Posts on this page:** 5\ **Page:** 1
**Author:** ![tgillett](https://avatars.discourse-cdn.com/v4/letter/t/ba8739/32.png) [@tgillett](https://forum.remote.it/u/tgillett)\ **Post date:** [September 22, 2021, 11:17am UTC](https://forum.remote.it/t/installing-targetagent-on-armbian-debian-buster-h3-build/437/1 "2021-09-22T11:17:32Z")
Hello I am trying to install the remoteit Target Agent on an Armbian / Debian (Buster) build for a ARM H3 ( Quad-Core Cortex-A7 ARM) device (similar to Orange Pi PC+ board.) I chose " Debian arm64" from the Supported Platforms list on the page, but I got the error message below indicating the incorrect architecture “arm64” and suggesting “armhf” Is there a Target Agent download available for this Architecture? I have previously used the CLI package labelled “ARMv7” successfully on this platform. (from the downloads page [https://downloads.remote.it/cli/latest/remoteit\_linux\_armv7](https://downloads.remote.it/cli/latest/remoteit_linux_armv7)) Thanks in advance for any help with this. Terry ```auto # apt install /root/remoteit-4.13.5.arm64.deb Reading package lists... Done Building dependency tree Reading state information... Done Note, selecting 'remoteit:arm64' instead of '/root/remoteit-4.13.5.arm64.deb' The following NEW packages will be installed: remoteit:arm64 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 0 B/102 kB of archives. After this operation, 0 B of additional disk space will be used. Get:1 /root/remoteit-4.13.5.arm64.deb remoteit arm64 4.13.5 [102 kB] dpkg: error processing archive /home/dragino/remoteit-4.13.5.arm64.deb (--unpack): package architecture (arm64) does not match system (armhf) Errors were encountered while processing: /home/dragino/remoteit-4.13.5.arm64.deb E: Sub-process /usr/bin/dpkg returned an error code (1) ``` ---
**Author:** ![gary](https://avatars.discourse-cdn.com/v4/letter/g/839c29/32.png) [@gary](https://forum.remote.it/u/gary)\ **Post date:** [September 22, 2021, 9:10pm UTC](https://forum.remote.it/t/installing-targetagent-on-armbian-debian-buster-h3-build/437/2 "2021-09-22T21:10:08Z")
What do you get from `sudo dpkg --print-architecture` ? It will probably be armhf. Use this package instead. I know it says “Raspberry Pi OS” but it really could be any Debian based armhf OS. ![image](https://canada1.discourse-cdn.com/flex030/uploads/remote/original/1X/1a40ad5b218a779296f0b817a57f465e07a26ea2.png) ---
**Author:** ![tgillett](https://avatars.discourse-cdn.com/v4/letter/t/ba8739/32.png) [@tgillett](https://forum.remote.it/u/tgillett)\ **Post date:** [September 23, 2021, 1:17am UTC](https://forum.remote.it/t/installing-targetagent-on-armbian-debian-buster-h3-build/437/3 "2021-09-23T01:17:09Z")
Thanks. I am out of the office for a few days so I will check it out then. ---
**Author:** ![tgillett](https://avatars.discourse-cdn.com/v4/letter/t/ba8739/32.png) [@tgillett](https://forum.remote.it/u/tgillett)\ **Post date:** [September 28, 2021, 7:18am UTC](https://forum.remote.it/t/installing-targetagent-on-armbian-debian-buster-h3-build/437/4 "2021-09-28T07:18:31Z")
Hi Gary I set it up using the “RPi” armhf package as you suggested and all is well. I wonder if it might be worth considering renaming the package at some point so that it is not RPi specific - just to avoid confusion. So now we have a consistent process across products using the ARM/Debian platform and the OpenWrt platform. Thanks again for your help. Regards Terry ---
**Author:** ![gary](https://avatars.discourse-cdn.com/v4/letter/g/839c29/32.png) [@gary](https://forum.remote.it/u/gary)\ **Post date:** [October 6, 2021, 12:52am UTC](https://forum.remote.it/t/installing-targetagent-on-armbian-debian-buster-h3-build/437/5 "2021-10-06T00:52:38Z")
Thanks for the update Terry. I agree about the naming.